|
Permatex®
High Strength
Sleeve Retainer
is a one
component,
solventless,
fast curing,
anaerobic
adhesive/
sealant. It is a
green colored
liquid resin
that hardens and
cures in the
absence of air.
Permatex® High
Strength Sleeve
Retainer
self-hardens
into a tough
plastic material
when it is
confined between
close-fitting
metal parts. The
cured adhesive
is a thermoset
plastic suitable
for exposure to
most solvents
and engine
fluids. OEM
Specified.
PRODUCT
BENEFITS
• No mixing
• No curing
outside of joint
• No on-torque
adjustments
needed
• Restores fit
to worn
assemblies
• Prevents
fretting and
corrosion
• Allows the use
of slip fit or
press fit
• For use on
assemblies with
gaps up to
0.007” diametral
TYPICAL
APPLICATIONS
• Cylinder
sleeves
• Valve seats
• Bearings and
bushings
• Woodruff keys
• Liner
assemblies
• Valve guides
DIRECTIONS
FOR USE
1. Remove
any grease or
oil by using
Permatex® Brake
&
Parts Cleaner.
2. For slip
fitted
assemblies,
apply adhesive
around the
leading edge of
the collar and
use a rotating
motion
during assembly.
3. For press
fits, adhesive
should be
applied
thoroughly to
both bond
surfaces and
assembled at
high press-on
rates.
4. For shrink
fitted
assemblies, the
adhesive should
be
coated onto the
pin; the collar
should then be
heated to
create
sufficient
clearance for
free assembly.
5. For faster
cure rates, use
Permatex ®
Surface Prep on
both surfaces.
6. Parts should
not be disturbed
until sufficient
handling
strength is
achieved.
7. Any material
that is on the
outside of the
assembly will
not cure. Wipe
off with a dry
cloth.
|
